Before & After Photos

Water was leaking by a fireplace in Richmond Heights, MO. To solve this issue, the WaterGuard system was installed. These drainage pipes intercept water at the perimeter of the basement and drain it toward the sump pump system. This system has a design that separates it from the soil under the floor so it will never clog. It will also drain any wall seepage without allowing dirt and debris from the floor to enter. This basement will remain clean and dry for years to come!

A sump pump failed to run during a power outage in Richmond Heights, MO, so the UltraSump Battery Back-Up Pumping System was installed. This will come in handy if the power goes out in the future. It will automatically turn on if the primary pump fails to run. This will provide reliability and restore peace of mind for years to come!

A basement in Richmond Heights, MO was leaking and needed to be addressed. The homeowner decided to give Woods a call. To solve this issue, WaterGuard™ was used to collect any water that entered the basement. This system sits on top of the soil to prevent any clogging from occurring. Next, a sump pump was installed to discharge the water out of the basement.  With these systems in place, the homeowner can rest easy knowing their basement will remain dry. 

A sidewalk in Saint Louis, MO, was unleveled, resulting in large gaps to form in between the concrete slabs. This needed to be addressed before safety concerns appeared, so the homeowner decided to give Woods a call. To solve this issue, PolyLevel™ was used. By drilling pea-sized holes into the concrete and injecting a polyurethane foam underneath, the foam expands to lift and level the concrete slabs. This foam also hardens to become rock solid within hours. Next, NexusPro™ was used to fill in the gaps in between the concrete slabs. This system will withstand any harsh weather. With these systems in place, the homeowner can now rest easy knowing their sidewalk is in great shape! 

A sidewalk in Saint Louis, MO, was unleveled, resulting in large gaps to form in between the concrete slabs. This needed to be addressed before safety concerns appeared, so the homeowner decided to give Woods a call. To solve this issue, PolyLevel™ was used. By drilling pea-sized holes into the concrete and injecting a polyurethane foam underneath, the foam expands to lift and level the concrete slabs. This foam also hardens to become rock solid within hours. Next, NexusPro™ was used to fill in the gaps in between the concrete slabs. This system will withstand any harsh weather. With these systems in place, the homeowner can now rest easy knowing their sidewalk is in great shape!