Click on a photo to enlarge.
Support beams were failing in a Saint Louis, MO basement, which was causing the floors in the house above to sag. To solve this issue, the SmartJack System was installed. This will stabilize the beams and floor joists in the crawlspace and lift the floor above it back toward its original elevation. Floor bounce caused by weakened joists or excessive spans will also be reduced. This basement will forever remain stable and restore peace of mind!
Support posts were failing in a basement in Saint Louis, MO, as they were shifting and cracking. To solve this issue, the SmartJack System was installed. This will stabilize the beams and floor joists in the basement and lift the floor above it back toward its original elevation. Floor bounce caused by weakened joists or excessive spans will also be reduced. This basement will remain stable and restore peace of mind for years to come!
This St. Louis homeowner's basement ceiling was starting to sag due to water damage, so the SmartJack support system was installed. This pushes up and supports the beams in the ceiling of the basement, keeping it from sagging and stabilizing the floor above. Now this customer will have peace of mind for years to come.
A basement in Saint Louis, Missouri, had some cracks starting to appear in the foundation walls. Most likely this is caused by moving ground soils as the temperature heats and cools over time. To address this issue, Woods came in and installed the Push Pier System. These will permanently stabilize the foundation, and in many cases, lift it back toward its original position. These can also close cracks and improve the operation of windows and doors. This is the least risky solution when the soil conditions are unknown. There is minimal disturbance from installation; installing them is a quick process and will solve the problem once and for all!
Melody D. of St. Louis, MO noticed the wooden support beam in her home was cracked and became concerned, so she contacted Woods Basement Systems for a free estimate.
Design specialist Jeremy R. evaluated the beam and determined that best solution would be to install a supplemental beam and SmartJacks.
Foreman Brett J. and his crew installed the I-beam and SmartJacks and the home is now stable.