Click on a photo to enlarge.
A homeowner in Willingboro, NJ was experiencing settlement of their pool deck concrete. Several slabs of pool deck concrete had sunk about 2 inches. System Design Specialist, Andy worked with the homeowner to address concerns and a team was sent out to inject PolyLevel under the fallen concrete slabs. Now the pool deck looks good as new!
This homeowner from Newton, NJ noticed a slab by their pools steps were sinking. This was causing an unsafe tripping hazard for the homeowner and their family and friends. They called Quality 1st Basements for help. Our System Design Specialist recommended Polylevel foam to lift the fallen slab back to its original position. This eliminated the tripping hazard and the homeowner and their family was free to play in their pool area without a fear of falling.
In Ringoes, NJ, a homeowner reached out to Quality 1st after observing concrete settlement on their driveway. This issue was resulting in safety concerns, as well as, a potential decrease in the overall curb appeal of the area.
Once our team arrived at the home they began administering our specially formulated PolyLevel Foam Injections, to lift and stabilize the settled portions of concrete. Along with a full application of our ultraviolet resistant NexusPro Joint Sealant to protect against erosion.
We have successfully restored this driveway to a smooth and leveled condition, delivering this homeowner with a renewed sense of pride in their home!
Quality 1st Basement Systems raised the sinking concrete slabs around this Lebanon, NJ pool. The homeowner and her family no longer have to worry about their safety while playing around the pool.
This homeowner living in Washington Township, NJ contacted Quality 1st Basement Systems after seeing our concrete lifting and leveling advertisement in the TheHomeMag. System Design Specialist, Mike Jersey, inspected the walkway and reassured the homeowner that each sinking slab would be lifted back to level with PolyLevel, removing the tripping hazard they had outside their home.
PolyLevel is a foam that is injected into a sinking slab of concrete, once underneath the foam begins to expand and harden raising it back to its original state.